The Jeep Trader

Click the photo above to view all photos.
Click the thumbnails to view larger images.
FEATURED AD!
1981 Jeep CJ
Availability:Available
Condition:Pre-Owned
Miles:144,000 Miles
Price:$16,900

Seller:SUSAN KNAUB
City, State:Billings, MT - (Map It!)
Email Contact:Click Here To Email The Seller
Phone Number:406-259-5440

Exterior Color:BROWN METALLIC
Interior Color:NUTMEG
Doors:2
Fuel Type:Gasoline
Engine:5.7L ZZ4
Transmission:Manual
Horsepower:355
Torque:405

Vehicle Listing Description

This is a beauty of a Jeep...1981 CJ7 sporting a 5.7L ZZ4 crate engine (see additional features for engine specs) with a GM performance parts Serpentine drive belt system and a Holley 4 barrel Carb...ONE PLUS OF BEING ABLE TO STILL WORK ON IT AND NOT HAVE TO WORRY ABOUT HAVING TO HAVE ALL THAT FANCY "TECHNICAL EQUIPMENT" TO DIAGNOSE THINGS :)
JEEP SR4 four speed manual transmission original DANA 300 transfer case (both have been rebuilt and have less than 1500 miles on them) Engine was installed about 9 years ago and has less than 1,000 miles on it. Both front and rear differentials are the stock JEEP that it came with.
Paint was redone about 15 years ago and she has been garaged ever since (my dad called it my "SISSY JEEP" because I didn't want to take it out wheelin and get it all scratched up) FOR MORE INFO CALL 406-259-5440 OR 406-670-6059 ASK FOR JON OR SUE

Vehicle Listing Features

MICKEY THOMPSON TIRES 31X10.50X15
ALUMINUM CENTER LINE STYLE WHEELS
NEW FRONT BUCKET SEATS
NEW INTERIOR CARPET AND INSULATION
ROLL CAGE HAS BEEN RETROFITTED TO THE STYLE OF THE WRANGLER (BOLTS TO WINDSHIELD FRAME FOR MORE LEG ROOM)
PADDED ROLL CAGE
ORIGINAL JEEP HARD TOP AND DOORS
BIKINI TOP, SOFT 1/2 DOORS, AND TONNEAU COVER
ENGINE Specifications:
Power: 355 HP @ 5400 RPM, 405 ft. lbs. of torque @ 3600 RPM
Displacement: 350 CID, 5.7L
Bore x Stroke: 4.00 x 3.48
Compression Ratio: 10:1
Recommended Fuel: 92 Octane
Block: Cast Iron, 1 piece rear seal, 4-bolt main caps.
Crankshaft: Forged Steel
Connecting Rods: Powdered Metal Steel
Pistons: High Silicone Aluminum
Camshaft: Steel Hydraulic Roller Tappet
Cam Lift: .474 Intake / .510 exhaust
Cam Duration @ .050: 208 deg. Intake / 221 deg. Exhaust
Lobe Separation: 112 Degree
Cylinder Heads: Aluminum, 3/8 screw-in rocker studs.
Combustion Chamber: 58cc
Valves: 1.94 Intake/ 1.50 Exhaust
Rocker Arms: Stamped Steel, 1.5:1 Ratio
Valve Springs: 12551483
Balance: Internal
Maximum GM Recommended RPM: 5800
Ignition Timing: Base 10 degrees BTDC, 32 degrees total
Alloy Wheels
AM/FM Stereo
Compact Disc
Telescope/Tilt Steering

Buyer Resources